HYUNDAI XTEER R&O VG 32, 46, 68

Available in 20 Liter and 200 Liter

XTeer R&O is a rust and oxidation inhibited hydraulic oil. It is formulated with select additives and designed for used in a variety of industrial applications

• Protection against oxidation
• Protection against rust and corrosion
• Low foaming

Applications

• Applications where a straight mineral oil is required without extreme pressure (EP), detergent, dispersant or anti-wear additives
• General machine oil
• Low pressure circulating fluid
• Non-Critical hydraulic applications
• Air-tool oil
• Drip or splash lubricant
• Spindle Oil
• Lubrication of light-duty compressors

Viscosity and Remarks

Parker Denison HF-1
DIN 51524 Part 1, MIL-H-17672D
U.S. Steel 126, AFNOR E46-800 HL
ISO 11158 HL

HYUNDAI XTEER AW VG 15, 32, 46, 68, 100

Available in 20 Liter and 200 Liter

XTeer AW is the best anti-wear hydraulic oil. It is formulated with excellent quality base oil technology and an additive system that provides exceptional oxidation stability, water separability and foam suppression

• Protection against oxidation
• Low foaming
• Protection against rust and corrosion
• Outstanding wear protection

Applications

Recommended for applications calling for anti-wear, rust and oxidation inhibited Additives including

• Hydraulic systems
• Industrial bearings
• Circulating systems, splash, bath and ring lube systems for bearings and gears
• A myriad of assorted industrial applications: hoists, machine tools, etc
• Gear sets not requiring an EP gear oil
• Bath, splash circulating or mist systems

Viscosity and Remarks

Parker Denison HF-0 (AW 32, 46, 68)
Fives Cincinnati P-68 (AW 32), P-70 (AW 46), P-69 (AW 68)
JCMAS HK (AW 32, 46)
GM LS-2 LH-04 (AW 32, 46, 68)
Bosch Rexroth RE 90220•DIN 51524 Part 2
ISO 11158 (HM)
SAE MS 1004 (HM)
Eaton Brochure 03-401-2010

HYUNDAI XTEER HVI VG 32, 46, 68

Available in 20 Liter and 200 Liter

XTeer HVI is the best high viscosity anti-wear hydraulic oil. It is formulated with excellent quality base oil technology and an additive system that providesexceptional oxidation stability, water separability and foam suppression

• Protection against oxidation
• Protection against rust and corrosion
• Low foaming
• Providing excellent anti-foam properties and rapid air release
• Excellent low-temperature properties for cold start-ups
• High dielectric strength for use in electrical service bucket trucks

Applications

Recommended for Enclosed industrial gear drives operating under heavy loads, high peak loads or intermittent shock loads

• Hydraulic systems
• Industrial bearings
• Circulating systems, splash, bath and ring lube systems for bearings and gears
• A myriad of assorted industrial applications: hoists, machine tools, etc
• Gear sets not requiring an EP gear oil
• Bath, splash circulating or mist system

Viscosity and Remarks

Parker Denison HF-0
Fives Cincinnati P-68, P-70, P-69
ISO 11158 HV
SAE MS 1004 HM
DIN 51524 Part 3
Bosch Rexroth RE 90220
JCMAS HK (HVI 32, 46)
GM LS-2 LH-04

HYUNDAI XTEER IGO VG 100, 150, 220, 320

Available in 20 Liter and 200 Liter

XTeer IGO is an outstanding Industrial Gear Oil. It is formulated with excellent quality base oil technology and extreme pressure (EP) additive

• High load-carrying capacity for protection against scuffing and wear
• Excellent oxidation resistance and thermal stability
• Excellent deposit control for gearbox cleanliness
• Protects against rust and corrosion
• Fast water separation•Quick foam release

Applications

Recommended for Enclosed industrial gear drives operating under heavy loads, high peak loads or intermittent shock loads

• Enclosed spur, bevel, helical, herringbone and planetary gear drives
• AGMA EP gear
• Heavily loaded plain
• Rolling-element bearings

Viscosity and Remarks

US Steel 224
ISO 12925-1 CKC/CKD
GM LS 2 EP Gear Oil
AGMA 9005-E02
DIN 51517 Part 3

HYUNDAI XTEER COMP-P VG 68, 100

Available in 20 Liter and 200 Liter

XTeer COMP-P is an extraordinary Compressor Oil. It is formulated with excellent quality base oil technology and a high technology additive system that assures exceptional equipment protection and reliability for compressors operating

• Oxidation Stability
• Low Evaporation Loss
• Antifoam Properties
• Rust Protection

Applications

Recommended for continuous high temperature operation

• Specifically recommended for reciprocating air compressor
• Units operating under severe condition

Viscosity and Remarks

SIEMENS TLV 9013 04
SIEMENS TLV 9013 05
ALSTOM HTGD 90117 W0001
GENERAL ELECTRIC GEK-32568J
DIN 51515 Part 1, 2

HYUNDAI XTEER WAY VG 68

Available in 20 Liter and 200 Liter

XTeer WAY is an amazing Sliding Surface Oil. It is formulated with excellent quality base oil technology and a dedicated slide-way lubricant additive package capable of meeting common industry performance specifications and end user expectations

• Strong demulsibility
• Water separation characteristics
• Excellent interaction profiles with metalworking fluid emulsions

Applications

ecommended for Machine tool slide-ways, tables and feed mechanisms

Viscosity and Remarks

Cincinnati Machine Performance P-47

HYUNDAI XTEER Turbine Oil 32, 46, 100

Available in 20 Liter and 200 Liter

XTeer Turbine Oil is a turbin oil made of high quality base oil and additives that is suitable for bearings of steam turbines, gas turbines and hydraulic turbines

• Protection against oxidation
• Protection against rust and corrosion

Applications

• Steam or gas turbines for industries / power generator / ships
• Bearings of all kinds of compressors (Especially centrifugal compressor)
• Decelerators and governor controls
• Bearings of power plant turbines, Decelerators and generators and Governor controls

Viscosity and Remarks

Siemens TLV 9013 04
Alstom HTGD 90117
General Electric GEK-32568F
Solar Turbines ES 9-224
DIN 51515

HYUNDAI XTEER Grease - 0, 1, 2, 3

Available in 15 KG and 180 KG

XTeer Grease series are very suitable for general use, as it is based on high-refined mineral oil and blended with various additives appropriately

• Excellent resistance for extreme pressure
• Good oxidation stability and rust prevention
• Service temperature: -20°C ~ +140°C

Applications

• All sorts of bearings under E.P.
• Joint and spline shaft
• Any parts for EP and anti-wear property

Viscosity and Remarks

Grease - 0, 1, 2, 3

HYUNDAI XTEER Grease EP - 0, 1, 2, 3

Available in 15 KG and 180 KG

XTeer Grease EP series are very suitable for general use, as it is based on high-refined mineral oil and blended with various additives appropriately

• Excellent resistance for extreme pressure
• Good oxidation stability
• Service temperature: -20°C ~ +140°C

Applications

• All sorts of bearings under E.P.
• Joint and spline shaft
• Any parts for EP and anti-wear property

Viscosity and Remarks

Grease EP - 0, 1, 2, 3